Solomatic-2606-1000x500

Description

Solomatic II makes working in front of a screen more comfortable. This is because the Reflect option enables a variety of slat positions, so that you can make optimum use of daylight.

Documents

  doc-GriColors-375-400x564   doc-Griral-Colors-2511-400x564

Solomatic                                             GriColors                                             GriRal Colors

 

     

Wind classes external                     Technical documention                  Technical documention covers
venetian blinds                                  venetian blinds

     

Technical documentation               Technical documentation              Covers
articulated cranks                              connection technique

 

 

Total energy transmittance

 

 

Bidding text

SOLOMATIC II 70, Aluminum external venetian blind with beaded slats, guide rails

Traditional blind design with direct connection of each individual slat at the adjustable belts. Lifting belts (gray) with edge and UV protection. Lowering in closed position, pivoting at every height. Aluminum slats cambered, bordered on both sides with single-sided guide nipple made of polyamide. Baked enamel finish in 150 Premium Colors. Bottom rail (end rail) and guide rails (19x22 mm) made of extruded aluminum, transparently anodized. Guide rails with weatherproof noise insulation inserts. Upper rail (housing) made of galvanized sheet steel with wind-stable lifting and adjustment mechanism.
Option: Open slat-lowering position (operating position). The shading with lowering of the blinds is often annoying – particularly at the workplace. The slat-lowering position of around 48 degrees prevents these dark stages while lowering the blind.

SOLOMATIC II 70, Aluminum external venetian blind with beaded slats, Reflect, guide rails

Traditional blind design with direct connection of each individual slat at the adjustable belts. Lifting belts (gray) with edge and UV protection. Lowering in closed position, pivoting at every height. Aluminum slats cambered, bordered on both sides with single-sided guide nipple made of polyamide. Baked enamel finish in 150 Premium Colors. With two zones with differently angled slats to use natural light and to preserve visibility to the outside. Bottom rail (end rail) and guide rails (19x22 mm) made of extruded aluminum, transparently anodized. Guide rails with weatherproof noise insulation inserts. Upper rail (housing) made of galvanized sheet steel with wind-stable lifting and adjustment mechanism.
Option: Open slat-lowering position (operating position). The shading with lowering of the blinds is often annoying – particularly at the workplace. The slat-lowering position of around 48 degrees prevents these dark stages while lowering the blind.

SOLOMATIC II 70, FIX, Aluminum external venetian blind with beaded slats, guide rails

Self-supporting blind design with reinforced guide rails. Direct connection of each individual slat at the adjustable belts. Lifting belts (gray) with edge and UV protection. Lowering in closed position, pivoting at every height. Aluminum slats cambered and bordered on both sides, with single-sided guide nipple made of polyamide. Baked enamel finish in 150 Premium Colors. Bottom rail (end rail) and guide rails (40x25 mm) for direct installation made of extruded aluminum, transparently anodized. Guide rails with weatherproof noise insulation inserts. Upper rail (housing) made of galvanized sheet steel with wind-stable lifting and adjustment mechanism.
Option: Open slat-lowering position (operating position). The shading with lowering of the blinds is often annoying – particularly at the workplace. The slat-lowering position of around 48 degrees prevents these dark stages while lowering the blind.

SOLOMATIC II 70, FIX, Aluminum external venetian blind with beaded slats, Reflect, guide rails

Self-supporting blind design with reinforced guide rails. Direct connection of each individual slat at the adjustable belts. Lifting belts (gray) with edge and UV protection. Lowering in closed position, pivoting at every height. Aluminum slats cambered and bordered on both sides, with single-sided guide nipple made of polyamide. Baked enamel finish in 150 Premium Colors. With two zones with differently angled slats to use natural light and to preserve visibility to the outside. Bottom rail (end rail) and guide rails (40x25 mm) for direct installation made of extruded aluminum, transparently anodized. Guide rails with weatherproof noise insulation inserts. Upper rail (housing) made of galvanized sheet steel with wind-stable lifting and adjustment mechanism.
Option: Open slat-lowering position (operating position). The shading with lowering of the blinds is often annoying – particularly at the workplace. The slat-lowering position of around 48 degrees prevents these dark stages while lowering the blind.

SOLOMATIC II 70, Aluminum external venetian blind with beaded slats, with cable guides

Traditional blind design with direct connection of each individual slat at the adjustable belts. Lifting belts (gray) with edge and UV protection. Lowering in closed position, pivoting at every height. Aluminum slats cambered and bordered on both sides, with edge protection to minimize wear on the cable guides. Baked enamel finish in 150 Premium Colors. Bottom rail (end rail) made of extruded aluminum, transparently anodized. With tensioning cable guides made of gray or black-casing steel rope, galvanized. Upper rail (housing) made of galvanized sheet steel with wind-stable lifting and adjustment mechanism.
Option: Open slat-lowering position (operating position). The shading with lowering of the blinds is often annoying – particularly at the workplace. The slat-lowering position of around 48 degrees prevents these dark stages while lowering the blind.

SOLOMATIC II 70, Aluminum external venetian blind with beaded slats, Reflect, with cable guides

Traditional blind design with direct connection of each individual slat at the adjustable belts. Lifting belts (gray) with edge and UV protection. Lowering in closed position, pivoting at every height. Aluminum slats cambered and bordered on both sides, with edge protection to minimize wear on the cable guides. Baked enamel finish in 150 Premium Colors. With two zones with differently angled slats to use natural light and to preserve visibility to the outside. Bottom rail (end rail) made of extruded aluminum, transparently anodized. With tensioning cable guides made of gray or black-casing steel rope, galvanized. Upper rail (housing) made of galvanized sheet steel with wind-stable lifting and adjustment mechanism.
Option: Open slat-lowering position (operating position). The shading with lowering of the blinds is often annoying – particularly at the workplace. The slat-lowering position of around 48 degrees prevents these dark stages while lowering the blind.

SOLOMATIC II 70, Box, Aluminum external venetian blind with beaded slats, guide rails

Traditional blind design with direct connection of each individual slat at the adjustable belts. Lifting belts (gray) with edge and UV protection. Lowering in closed position, pivoting at every height. Aluminum slats cambered, bordered on both sides with single-sided guide nipple made of polyamide. Baked enamel finish in 150 Premium Colors. Bottom rail (end rail) and guide rails (19x22 mm) made of extruded aluminum, transparently anodized. Guide rails with weatherproof noise insulation inserts. Upper rail (housing) made of galvanized sheet steel with wind-stable lifting and adjustment mechanism. Box made of extruded aluminum, transparently anodized, square or round.
Option: Open slat-lowering position (operating position). The shading with lowering of the blinds is often annoying – particularly at the workplace. The slat-lowering position of around 48 degrees prevents these dark stages while lowering the blind.

SOLOMATIC II 70, Box, Aluminum external venetian blind with beaded slats, Reflect, guide rails

Traditional blind design with direct connection of each individual slat at the adjustable belts. Lifting belts (gray) with edge and UV protection. Lowering in closed position, pivoting at every height. Aluminum slats cambered, bordered on both sides with single-sided guide nipple made of polyamide. Baked enamel finish in 150 Premium Colors. With two zones with differently angled slats to use natural light and to preserve visibility to the outside. Bottom rail (end rail) and guide rails (19x22 mm) made of extruded aluminum, transparently anodized. Guide rails with weatherproof noise insulation inserts. Upper rail (housing) made of galvanized sheet steel with wind-stable lifting and adjustment mechanism. Box made of extruded aluminum, transparently anodized, square or round.
Option: Open slat-lowering position (operating position). The shading with lowering of the blinds is often annoying – particularly at the workplace. The slat-lowering position of around 48 degrees prevents these dark stages while lowering the blind.

SOLOMATIC II 70, Box, Aluminum external venetian blind with beaded slats, with cable guides

Traditional blind design with direct connection of each individual slat at the adjustable belts. Lifting belts (gray) with edge and UV protection. Lowering in closed position, pivoting at every height. Aluminum slats cambered and bordered on both sides, with edge protection to minimize wear on the cable guides. Baked enamel finish in 150 Premium Colors. Bottom rail (end rail) made of extruded aluminum, transparently anodized. With tensioning cable guides made of gray or black-casing steel rope, galvanized. Upper rail (housing) made of galvanized sheet steel with wind-stable lifting and adjustment mechanism. Box made of extruded aluminum, transparently anodized, square or round.
Option: Open slat-lowering position (operating position). The shading with lowering of the blinds is often annoying – particularly at the workplace. The slat-lowering position of around 48 degrees prevents these dark stages while lowering the blind.

SOLOMATIC II 70, Box, Aluminum external venetian blind with beaded slats, Reflect, with cable guides

Traditional blind design with direct connection of each individual slat at the adjustable belts. Lifting belts (gray) with edge and UV protection. Lowering in closed position, pivoting at every height. Aluminum slats cambered and bordered on both sides, with edge protection to minimize wear on the cable guides. Baked enamel finish in 150 Premium Colors. With two zones with differently angled slats to use natural light and to preserve visibility to the outside. Bottom rail (end rail) made of extruded aluminum, transparently anodized. With tensioning cable guides made of gray or black-casing steel rope, galvanized. Upper rail (housing) made of galvanized sheet steel with wind-stable lifting and adjustment mechanism. Box made of extruded aluminum, transparently anodized, square or round.
Option: Open slat-lowering position (operating position). The shading with lowering of the blinds is often annoying – particularly at the workplace. The slat-lowering position of around 48 degrees prevents these dark stages while lowering the blind.

SOLOMATIC II 80, Aluminum external venetian blind with beaded slats, guide rails

Traditional blind design with direct connection of each individual slat at the adjustable belts. Lifting belts (gray) with edge and UV protection. Lowering in closed position, pivoting at every height. Aluminum slats cambered, bordered on both sides with single-sided guide nipple made of polyamide. Baked enamel finish in 150 Premium Colors. Bottom rail (end rail) and guide rails (19x22 mm) made of extruded aluminum, transparently anodized. Guide rails with weatherproof noise insulation inserts. Upper rail (housing) made of galvanized sheet steel with wind-stable lifting and adjustment mechanism.
Option: Open slat-lowering position (operating position). The shading with lowering of the blinds is often annoying – particularly at the workplace. The slat-lowering position of around 48 degrees prevents these dark stages while lowering the blind.

SOLOMATIC II 80, Aluminum external venetian blind with beaded slats, Reflect, guide rails

Traditional blind design with direct connection of each individual slat at the adjustable belts. Lifting belts (gray) with edge and UV protection. Lowering in closed position, pivoting at every height. Aluminum slats cambered, bordered on both sides with single-sided guide nipple made of polyamide. Baked enamel finish in 150 Premium Colors. With two zones with differently angled slats to use natural light and to preserve visibility to the outside. Bottom rail (end rail) and guide rails (19x22 mm) made of extruded aluminum, transparently anodized. Guide rails with weatherproof noise insulation inserts. Upper rail (housing) made of galvanized sheet steel with wind-stable lifting and adjustment mechanism.
Option: Open slat-lowering position (operating position). The shading with lowering of the blinds is often annoying – particularly at the workplace. The slat-lowering position of around 48 degrees prevents these dark stages while lowering the blind.

SOLOMATIC II 80, FIX, Aluminum external venetian blind with beaded slats, guide rails

Self-supporting blind design with reinforced guide rails. Direct connection of each individual slat at the adjustable belts. Lifting belts (gray) with edge and UV protection. Lowering in closed position, pivoting at every height. Aluminum slats cambered and bordered on both sides, with single-sided guide nipple made of polyamide. Baked enamel finish in 150 Premium Colors. Bottom rail (end rail) and guide rails (40x25 mm) for direct installation made of extruded aluminum, transparently anodized. Guide rails with weatherproof noise insulation inserts. Upper rail (housing) made of galvanized sheet steel with wind-stable lifting and adjustment mechanism.
Option: Open slat-lowering position (operating position). The shading with lowering of the blinds is often annoying – particularly at the workplace. The slat-lowering position of around 48 degrees prevents these dark stages while lowering the blind.

SOLOMATIC II 80, FIX, Aluminum external venetian blind with beaded slats, Reflect, guide rails

Self-supporting blind design with reinforced guide rails. Direct connection of each individual slat at the adjustable belts. Lifting belts (gray) with edge and UV protection. Lowering in closed position, pivoting at every height. Aluminum slats cambered and bordered on both sides, with single-sided guide nipple made of polyamide. Baked enamel finish in 150 Premium Colors. With two zones with differently angled slats to use natural light and to preserve visibility to the outside. Bottom rail (end rail) and guide rails (40x25 mm) for direct installation made of extruded aluminum, transparently anodized. Guide rails with weatherproof noise insulation inserts. Upper rail (housing) made of galvanized sheet steel with wind-stable lifting and adjustment mechanism.
Option: Open slat-lowering position (operating position). The shading with lowering of the blinds is often annoying – particularly at the workplace. The slat-lowering position of around 48 degrees prevents these dark stages while lowering the blind.

SOLOMATIC II 80, Aluminum external venetian blind with beaded slats, with cable guides

Traditional blind design with direct connection of each individual slat at the adjustable belts. Lifting belts (gray) with edge and UV protection. Lowering in closed position, pivoting at every height. Aluminum slats cambered and bordered on both sides, with edge protection to minimize wear on the cable guides. Baked enamel finish in 150 Premium Colors. Bottom rail (end rail) made of extruded aluminum, transparently anodized. With tensioning cable guides made of gray or black-casing steel rope, galvanized. Upper rail (housing) made of galvanized sheet steel with wind-stable lifting and adjustment mechanism.
Option: Open slat-lowering position (operating position). The shading with lowering of the blinds is often annoying – particularly at the workplace. The slat-lowering position of around 48 degrees prevents these dark stages while lowering the blind.

SOLOMATIC II 80, Aluminum external venetian blind with beaded slats, Reflect, with cable guides

Traditional blind design with direct connection of each individual slat at the adjustable belts. Lifting belts (gray) with edge and UV protection. Lowering in closed position, pivoting at every height. Aluminum slats cambered and bordered on both sides, with edge protection to minimize wear on the cable guides. Baked enamel finish in 150 Premium Colors. With two zones with differently angled slats to use natural light and to preserve visibility to the outside. Bottom rail (end rail) made of extruded aluminum, transparently anodized. With tensioning cable guides made of gray or black-casing steel rope, galvanized. Upper rail (housing) made of galvanized sheet steel with wind-stable lifting and adjustment mechanism.
Option: Open slat-lowering position (operating position). The shading with lowering of the blinds is often annoying – particularly at the workplace. The slat-lowering position of around 48 degrees prevents these dark stages while lowering the blind.

SOLOMATIC II 80, Box, Aluminum external venetian blind with beaded slats, guide rails

Traditional blind design with direct connection of each individual slat at the adjustable belts. Lifting belts (gray) with edge and UV protection. Lowering in closed position, pivoting at every height. Aluminum slats cambered, bordered on both sides with single-sided guide nipple made of polyamide. Baked enamel finish in 150 Premium Colors. Bottom rail (end rail) and guide rails (19x22 mm) made of extruded aluminum, transparently anodized. Guide rails with weatherproof noise insulation inserts. Upper rail (housing) made of galvanized sheet steel with wind-stable lifting and adjustment mechanism. Box made of extruded aluminum, transparently anodized, square or round.
Option: Open slat-lowering position (operating position). The shading with lowering of the blinds is often annoying – particularly at the workplace. The slat-lowering position of around 48 degrees prevents these dark stages while lowering the blind.

SOLOMATIC II 80, Box, Aluminum external venetian blind with beaded slats, Reflect, guide rails

Traditional blind design with direct connection of each individual slat at the adjustable belts. Lifting belts (gray) with edge and UV protection. Lowering in closed position, pivoting at every height. Aluminum slats cambered, bordered on both sides with single-sided guide nipple made of polyamide. Baked enamel finish in 150 Premium Colors. With two zones with differently angled slats to use natural light and to preserve visibility to the outside. Bottom rail (end rail) and guide rails (19x22 mm) made of extruded aluminum, transparently anodized. Guide rails with weatherproof noise insulation inserts. Upper rail (housing) made of galvanized sheet steel with wind-stable lifting and adjustment mechanism. Box made of extruded aluminum, transparently anodized, square or round.
Option: Open slat-lowering position (operating position). The shading with lowering of the blinds is often annoying – particularly at the workplace. The slat-lowering position of around 48 degrees prevents these dark stages while lowering the blind.

SOLOMATIC II 80, Box, Aluminum external venetian blind with beaded slats, with cable guides

Traditional blind design with direct connection of each individual slat at the adjustable belts. Lifting belts (gray) with edge and UV protection. Lowering in closed position, pivoting at every height. Aluminum slats cambered and bordered on both sides, with edge protection to minimize wear on the cable guides. Baked enamel finish in 150 Premium Colors. Bottom rail (end rail) made of extruded aluminum, transparently anodized. With tensioning cable guides made of gray or black-casing steel rope, galvanized. Upper rail (housing) made of galvanized sheet steel with wind-stable lifting and adjustment mechanism. Box made of extruded aluminum, transparently anodized, square or round.
Option: Open slat-lowering position (operating position). The shading with lowering of the blinds is often annoying – particularly at the workplace. The slat-lowering position of around 48 degrees prevents these dark stages while lowering the blind.

SOLOMATIC II 80, Box, Aluminum external venetian blind with beaded slats, Reflect, with cable guides

Traditional blind design with direct connection of each individual slat at the adjustable belts. Lifting belts (gray) with edge and UV protection. Lowering in closed position, pivoting at every height. Aluminum slats cambered and bordered on both sides, with edge protection to minimize wear on the cable guides. Baked enamel finish in 150 Premium Colors. With two zones with differently angled slats to use natural light and to preserve visibility to the outside. Bottom rail (end rail) made of extruded aluminum, transparently anodized. With tensioning cable guides made of gray or black-casing steel rope, galvanized. Upper rail (housing) made of galvanized sheet steel with wind-stable lifting and adjustment mechanism. Box made of extruded aluminum, transparently anodized, square or round.
Option: Open slat-lowering position (operating position). The shading with lowering of the blinds is often annoying – particularly at the workplace. The slat-lowering position of around 48 degrees prevents these dark stages while lowering the blind.

Collections

colors-GriColors

colors-GriRal

Gallery